Our polyurethane injection systems carries the BIX Lifetime-Plus Warranty!

Leaks in concrete structures have been a problem for homeowners and commercial buildings since concrete was first used. Now there is a product that surpasses all other methods of repair! A special polyurethane resin is injected into the concrete crack or hole under high pressure expanding to fill the void.

Polyurethane injection can be performed from the negative side without digging and without access to the water side. This method provides a waterproof seal through the entire width of the concrete, not just a surface patch. Polyurethane Injection can also be used to seal cold joints and expansion joints. Since polyurethane is water activated, injecting it into a crack achieves a superior bond to wet surfaces. This special polyurethane resin is an effective water cut-off system even when water seepage is present. It has the advantages of deep penetration into very small cracks in concrete, no shrinkage, has good elasticity to tolerate concrete expansion and contraction, and tolerates unavoidable debris due to very low viscosity.

How the system works

1. Injection holes are drilled at an angle to intersect the crack halfway into the wall.
2. An injection port is inserted into the drilled hole.
3. Polyurethane resin is injected (up to 2,000 psi) through the ports into the crack.
4. The polyurethance expands and seals the crack.

BIX Basement Water Control is a provider of high pressure polyurethane injection and other foundation services. BIX has been serving Illinois and Missouri communities since 1979. All work is guaranteed in writing. Call or e-mail to schedule your free estimate or to view a copy of our warranty.